ICS Technologies and Communications an authorized ICOM dealer
Conventional VHF and UHF ICOM F70/F80 handheld and mobile radios for $7 to as low as $3 a day and only $46 a month.
Event Pac Radio Kit with 20 F4 UHF handheld radios, 2 High Noise Headsets, Rack Charger, 4 spare batteries in shipping case delivered to you by UPS 2 days before your 2-4 day event is only $325 plus you pay return ground shipping.
DCAT can provide you with deployable repeaters to provide larger area coverage and has mobile towers for extended repeater coverage from the best location in the area.
DCAT can provide complete on-site technical and management support for your rental deployment, be it a weekend or a long term event.
Please look at our Command Post, Data and Public Address (Air Show) links for additional services that we can provide for your event, training or disaster response.
Intrinsically safe versions cannot be upgraded to P25 digital. Enhanced MDC versions can be upgraded with purchase of optional UT-120 board and P25 activation key, but the enhanced MDC features will be lost.
*These versions are special order only - please allow 90 to 120 days ARO for delivery.
**Enhanced MDC adds GPS capabilities for AVL/APL and allows use of free-form short text messages of up to 48 characters in length.
***Any of these digital versions may be upgraded with AES and/or DES encryption (non-FIPS certified). Optional activation key option must be purchased.
****FIPS 140-2 versions come with activated, factory installed AES (FIPS certified) and DES (non-FIPS certified). No activation code is required.
The FIPS 140-2 validation confirms that the Icom encryption module, UT-120, has passed rigorous field tests and provides agencies the independent assurance that the module meets or exceeds the highest performance standards in encryption for its classification. FIPS encryption is a requirement for many federal agencies.
Intrinsically Safe (I.S.) refers to electronics equipment in which electrical energy is not present at levels that would spark and ignite an oxidized mixture of flammable gasses, vapors or liquids or combustible dusts or fibers.
Icom I.S. two-way radios are approved by Factory Mutual (FM), an international third-party insurance and loss prevention company.
The water removal design from the speaker grill keeps the communication clear, no matter what the elements are. The ICF70/F80 series has waterproof construction that is sealed with waterproof gaskets.
* According to the International Standard IEC60529 (2001). 1m depth for 30 minutes.
Use the built-in CTCSS, DTCS, 2-Tone, 5-Tone and BIIS capability to set up your own talk groups and quiet stand-by when others are talking. You can also set up selective calls to individuals or control a repeater.
Up to 10 2-Tone and 8 5-Tone codes can be decoded on a single memory channel. This is perfect for professionals who require multiple district paging on one channel. When a matched tone is received, the following items are programmable for each code.
The large high contrast LCD clearly shows a variety of information with a full dot-matrix display. Program the display to show either 1 line with 12 characters or 2 lines with 24 characters. Status icons are displayed at the top and the functions assigned to the P buttons (P0P3) are shown at the bottom of the display.
The bottom of the LCD shows the assigned functions (see right)
The large capacity 1600mAh Lithium-Ion (Li-Ion) battery pack, BP-235 provides a practical 8 hours* of operating time. Li-Ion batteries allow flexible charging and have almost no memory effect.
* Typical operation Tx:Rx: Stand-by=5:5:90
The tactical group function allows you to copy memory channels to the tactical zone (zone 32) and dynamically regroup memory channels. Using the optional zone copy cable, memory channels in the tactical zone can be transferred from a master radio to other radios.
The IC-F70/F80 series includes a built-in inversion type voice scrambler. When a more secure system is required, the optional voice scrambler unit UT-109 or UT-110 is available.
* These voice scrambler functions are not available in digital mode.
The following selective calling and ANI features are available with the built-in MDC signaling.
Developed by Icom America Inc., EMDC is built upon and expands the widely used MDC 1200 data signaling protocol and system. Not only is EMDC fully compatible with MDC 1200, but it was also developed to allow future upgrades in features and functions without making your current equipment obsolete. These allow EMDC to:
Automatic vehicle location (AVL) or automatic personnel location (APL) is a core function of the EMDC system. EMDC was designed to provide AVL and APL capabilities without the need for external modems, data only radios, data only channels, or the requirement to replace an entire fleet of radios and infrastructure.
EMDC provides greater flexibility by allowing the use of free-form short text messages of up to 48 characters in length which can be sent to individual radios or to groups of radios. This allows the transmission of information, such as addresses or directions, without requiring the field unit to write down messages transmitted by voice  improving efficiency and avoiding the possibility of error due to phonetic confusion.
EMDC radios can be configured to allow their radio signal strength indicator (RSSI) and battery level gauge to be remotely monitored by the dispatcher. The dispatcher can also adjust the configuration of GPS periodic reporting from the field units remotely.
The only requirements to add a full suite of signaling capabilities are:
Intrinsically safe version approved by FM Approvals, is suitable for use in hazardous areas where flammable gasses or liquids are used.
The radio stun/kill functions disable a lost or stolen radio over the air, eliminating security threats from undesired listeners. The power-on password prevents unauthorized people turning on the radio.
Analog
KEY
*Enhanced MDC adds GPS capabilities for AVL/APL and allows use of free-form short text messages of up to 48 characters in length.
**Any of these digital version may be upgraded with AES and/or DES encryption (non-FIPS certified. Optional activations key option must be purchased.
***High Power Upgrade Kit (HPUK) converts the F1721 series into a 110 watt VHF mobile.
For organizations who run an analog radio system and must migrate to a conventional P25 digital system, Icom provides one of the best solutions. The new F1721D series mobile allows you to program P25 digital and/or FM analog mode per channel. Flash ROM capability means future upgrades and flexible customization, tailored for your system. Moreover, built-in multiple tone signaling capability and an optional voice scrambler satisfy existing analog FM system requirements. This new Icom’s range frequency coverage and rugged construction ensures a flexible, long life radio for you. Icom is the smart choice for current – and future – public safety communication needs.
Project 25 (P25) Digital FeaturesInteroperability
The IC-F1721D, F1821D series is APCO Project 25 (P25) compliant. The mixed mode scan allows you to detect and receive both analog FM and P25 digital modes.
Mixed mode operation
The IC-F1721D/F1821D is compatible with both analog FM mode and P25 digital mode. Program digital and/or analog FM modes per channel. The mixed mode scan allows you to detect and receive both analog FM and P25 digital modes and to transmit either mode depending on programming.
AES/DES digital encryption activation software
AES and DES are encryption standards required by public safety agencies. The IC-F1721D and F1821D series provide secure encryption with DES and AES accordingly when activated with EX-2785 J02 (for DES) and EX-2785 J03 (for AES) activation software.
Upgrade to digital option
The IC-F1721/F1821 series is available in two digital versions. One version is P25 compliant out of the box. Version two is an analog only radio* that is future upgradeable to P25 digital compatibility — grow into digital with Icom.
*Optional UT-120 and EX-2785 J01 required.
With the optional remote control kit, RMK-2 and separation cable, the front panel of the radio can be detached from the main unit. It allows you flexible installation even in limited installation space. Separation cable length is selectable from 1.9, 3.0 and 8.0m.
Using a high contrast LCD, the IC-F1721/F1821 series shows operating channels, tone and other settings clearly under nearly any lighting conditions. With a dot matrix display, upper and lower case characters can be easily distinguished. In addition, you can change the display setting to show one line and 12 characters, or two lines and 24 characters via programming.
The new heavy-duty hand microphone, HM-148, uses a dynamic design that is made to handle punishment. The oversized dimensions allow for easy use with gloves on. And the curl cord can be easily replaced by simply opening the case–easy maintenance for long term use.
With heavy-duty construction, the IC-F1721/F1821 series is built to last. The IC-F1721/F2721 series incorporates a 4W speaker in an impact resistant polycarbonate front panel for crisp clear audio, and the IC-F1821/F2821 series has a backlit 10-keypad for extended operation. The 10-keypad version is supplied with an external speaker.
Use the built-in CTCSS, DTCS, 2-Tone, or 5-Tone capability to set up your own talk groups, and have your radio standby quietly when other groups are talking. You can also set up selective calls to individuals or control a repeater.
Encode or decode up to 10 2-Tone, 8 5-Tone codes on a single memory channel. This is perfect for professionals who require multiple district paging on one channel. When a matched tone is received, the following items are programmable for each code.
The following selective calling and ANI features are available with the built-in MDC signaling.
Up to 256 memory channels can be divided into 32 memory zones, and allows you quick access to the intended channel.
The tactical group function allows you to copy memory channels to the tactical zone (zone 32) and dynamically regroup memory channels. Using the optional zone copy cable, memory channels in the tactical zone can be transferred from a master radio to other radios.
The IC-F1721/F1821 series includes a built-in inversion type voice scrambler in all models. When a more secure system is required, the optional voice scrambler unit UT-109 or UT-110 is available.
* These voice scrambler functions are not available in digital mode.
The radio stun/kill functions disable a lost or stolen radio over the air, eliminating security threats from undesired listeners. The power-on password prevents unauthorized people turning on the radio.
When an external loud speaker is connected with the radio, you can speak through the radio’s microphone. The RX speaker function allows you to relay the received audio over the loud speaker.
This repeater looks as good as it performs. A rugged heatsink, large cooling fans and a high performance power module provide the repeater with a stable 50W at full duty cycle operation.
A built-in backup system supports automatic switching to an external power supply (13.6V DC) if the AC power supply fails.
Up to 16 CTCSS/DTCS tones (TX/RX tones respectively) can be programmed in a channel. This feature allows you to share a channel with multiple user groups. You can also give priority/exclusive use to a specified group simply by programming different tones to another memory channel. Ideal for many different applications.
Multiple signaling systems are equipped as standard. These systems are fully compatible with Icom F-series radios.
The repeater has an internal space to install a duplexer and isolator*. The controls of the duplexer are accessible from the front of the repeater without disassembly. Faster and easier maintenance and adjustment is possible.
* Ask your dealer for details about available duplexers and isolators.
You can control the repeater from a remote location over the air or over a phone line with DTMF.